Pioneer PD-10-K - Manual (Page 6)

Controls and displays 03
6
En
Chapter 3:
Controls and displays
Remote control
1  STANDBY/ON
Switches the amplifier between standby and on.
2 Number buttons
Use these buttons when you wish to specify a certain
track for playback. Use the number buttons to select the
track, then press ENTER to confirm the selection.
3 CLEAR
Press to clear the contents set for programmed playback
(page 8).
4 SETUP
Use to set the auto power down function (page 11).
5 ///
Use these to select items, change settings and
move the cursor.
ENTER
Use this to implement the selected item or enter a
setting that you have changed.
6 iPod MENU (PD-30 only)
Use when operating the iPod/iPhone/iPad menu.
7 
Press to return to the beginning of the currently
playing track. Press twice to return to the beginning
of the previous track.

Press to start playback. During playback, pause/
unpause playback.

Press during playback to skip ahead to the
beginning of the next track.

Press to perform fast reverse on the currently
playing track. If the button is pressed again during
fast reverse, the reversing speed changes in four
steps.

Press to stop playback.

Press to perform fast forward on the currently
playing track. If the button is pressed again during
fast forward, the fast forward speed will change in
four steps.
8 iPod/USB (PD-30)
USB (PD-10)
Press to switch the unit’s input to iPod or USB
(page 9,10).
PD-10
12
16
10
19
17
15
11
1
9
2
3 3
3 5
3 7
4
14
8
20
18
13
1 12
13
14
15
16
2
3
4
6
8
10
11
9
7
5
PD-30
9 SACD/CD
Press to switch the unit’s input to SACD/CD. In the case
of hybrid SACD discs, if this button is pressed when
playback is stopped, the disc's playback area changes
(page 11).
10 REPEAT
Press to initiate repeat play (page 8).
RANDOM
Press to initiate random play (page 8).
PROGRAM
Press to initiate programmed playback (page 8).
11 PURE AUDIO
Press this button to activate the Pure Audio mode. In this
mode, audio playback is performed with greatest fidelity
to the original sounds (page 11).
12  OPEN/CLOSE
Press to open and close the disc tray (page 8).
13 ENTER
Use this to implement the selected item or enter a
setting that you have changed.
14 DISPLAY
Press to display various data about the disc, including
elapsed playing time and remaining playing time
(page 8).
15 DIMMER
Press to change the illumination levels for the main
unit’s front panel display and indicators (page 11).
16 S.RETRIEVER
Press to alternate between sound retriever function
settings(page 11).
17  AMPLIFIER (PD-10 only)
Press to switch the power between ON and STANDBY on
a Pioneer AV amplifier.
18 VOLUME +/– (PD-10 only)
Press these buttons to adjust the sound volume of a
Pioneer AV amplifier.
19 MUTE (PD-10 only)
Press to mute the sound on a Pioneer AV amplifier.
Press again to cancel the muting function.
20 INPUT (PD-10 only)
Press to switch the input on a Pioneer AV amplifier.
Rear panel
See page 5 for details regarding connections.
1 CONTROL IN/OUT jack (PD-30 only)
2 DIGITAL OUT (COAXIAL) terminal
3 DIGITAL OUT (OPTICAL) terminal
4 ANALOG OUT terminals
5 AC IN jack
PD-30
DIGITAL IN
1 2 3 5 4
PD-30_PWSYXZT8.book 6 ページ ２０１２年５月７日 月曜日 午前１１時３３分