Pioneer PD-10-K - Manual (Page 7)

Controls and displays 03
7
En
English
Deutsch
Français
Nederlands
Italiano
Español
Ру
сский
Front panel
1 /I STANDBY/ON
When power is turned on, the power indicator in the
center of the button will light.
• On the PD-30 model, this switches the amplifier
between off and on.
To turn power ON, press the button until it remains
in the depressed position.
• On the PD-10 model, this switches the amplifier
between standby and on.
2 STANDBY indicator
Lights when power is in the STANDBY mode.
3 PURE AUDIO indicator
Lights when Pure Audio function is ON (page 11).
4 Front panel display
(See the following description.)
5 
Press to open and close the disc tray (page 8).
6 FUNCTION
Use to change the input source. The source changes as
below.
DISC
 iPod* 1 /USB  Return to the beginning
(Undisplayed).
*
1 PD-30 only
7 
Press to stop playback.
8 
Press to start playback. During playback, pause/
unpause playback.
9 Remote sensor
Receives the signals from the remote control (page 4).
10 iPod/USB port (PD-30)
USB port (PD-10)
Use to connect your Apple iPod/iPhone/iPad (page 9) or
connect a USB device (page 10).
11 Disc tray (page 8)
12  
Press to return to the beginning of the currently playing
track. Press twice to return to the beginning of the
previous track. When the button is held depressed, the
currently playing track will be reversed at fast speed.
• When pressed again during fast reverse, the speed
of fast reverse will change in four steps.
13  
Press to advance to the beginning of the next track.
When the button is held depressed, the currently playing
track will be forwarded at fast speed.
• When pressed again during fast forward, the speed
of fast forward will change in four steps.
PD-30
3 5 6 7 8 1
9
2 4
10 12 13 11
Front panel display
1 USB/iPod
Lights during playback of USB flash memory or iPod/
iPhone/iPad.
2 SACD/CD/DSD
The indicator lights corresponding to the currently
playing disc type.
3 PGM
Lights during programmed playback (page 8).
4 TRK
Lights when displaying the track number together with
either the elapsed playing time or remaining playing
time.
5 FILE
Lights when a file name is displayed.
6 REPEAT
Lights during repeat playback (page 8).
7 RANDOM
Lights during random playback (page 8).
8 ALL
Lights during disc-repeat playback (page 8).
9 TOTAL
Lights when the disc’s remaining playing time is
displayed.
10 REMAIN
Lights when displaying the remaining playing time for
track or disc.
11 S.RTRV
Lights when the sound retriever function is ON
(page 11).
12 SET UP
Lights when setting the auto power-down function
(page 11).
13 
Lights during fast forward.

Lights during fast reverse.

Lights during playback.

Lights during pause mode.
14 Character display
1 2 4 5 6
14 11 12 13
3 7 8 9 10
PD-30_PWSYXZT8.book 7 ページ ２０１２年５月７日 月曜日 午前１１時３３分