Baracoda All in One Printer - Manual (Page 10)

ToughRunners / ScanWear – Communication Protocol v1.2 - 10 -
Data Capture
for Workforce
in Motion
3.4. Restore default settings
Command ID 0x0F
Description Restore factory default settings (reboots scanner)
Length 1
payload A = 0
Response none
3.5. MMI settings
Command ID 0x40
Description Get vibrator
Length 0
payload none
Response ABC
where :
A = Vibration duration on BAD READ event
B = Vibration duration on BARCODE LOST event
C = Vibration duration on NACK event
Durations in 1/10 sec
Default settings:
0x0A 0x0A 0x0A
Command ID 0x41
Description Set vibrator
Length 3
payload ABC
where :
A = Vibration duration on BAD READ event