Baracoda All in One Printer - Manual (Page 24)

ToughRunners / ScanWear – Communication Protocol v1.2 - 24 -
Data Capture
for Workforce
in Motion
EE = EAN/UPC
FF = Code128
GG = MSI
HH = PLESSEY
II = Code93
JJ = EAN128
KK = Codabloc F
LL = RSS 14 (GS1 Databar)
MM = RSS Ltd (GS1 Databar Ltd)
NN = RSS Expanded (GS1 Databar Ltd)
0x00 means disabled.
Response 0 (1 = ERROR)
3.10. Communication commands
Command ID 0xD5
Description Get radio behavior when in charge
Length 0
payload None
Response 1 byte:
Bit A.0 = 1 if switch to slave when charging
Bit A.1 = 1 if switch radio off when charging
Default settings :
A = 0x01
Command ID 0xD6
Description Set radio behavior when in charge