Baracoda All in One Printer - Manual (Page 11)

ToughRunners / ScanWear – Communication Protocol v1.2 - 11 -
Data Capture
for Workforce
in Motion
B = Vibration duration on BARCODE LOST event
C = Vibration duration on NACK event
Durations in 1/10 sec
Response 0 (1 = ERROR)
Command ID 0x42 (Since version 3.01.00)
Description Get beeps
Length 0
payload none
Response 1 byte:
Bit A.0 = 0 enable barcode decoded beep, 1
disable barcode decoded beep
Bit A.1 = 0 enable barcode acknowledgement beep, 1
disable barcode acknowledgement beep
Default settings:
0x00
Command ID 0x43 (Since version 3.01.00)
Description Set beeps
Length 1
payload 1 byte:
Bit A.0 = 0 enable barcode decoded beep, 1
disable barcode decoded beep
Bit A.1 = 0 enable barcode acknowledgement beep, 1
disable barcode acknowledgement beep
Response 0 (1 = ERROR)