Plugging in a usb storage device, Unplugging a usb storage device, Connecting and disconnecting an ipod – Pioneer AVIC-F550BT User Manual

Page 24: Connecting your ipod, Disconnecting your ipod, Startup and termination, On first-time startup, Basic operation

Advertising
background image

24

Basic operation

This navigation system may not achieve
optimum performance with some USB
storage devices.

Connection via a USB hub is not possible.

Plugging in a USB storage device

1. Pull out the plug from the USB port of the

USB interface cable for iPod.

2. Plug a USB storage device into the USB

interface cable.

USB interface cable

USB storage device

Unplugging a USB storage device

* Pull out the USB storage device after

checking that no data is being accessed.

Connecting and

disconnecting an iPod

! CAUTION

To prevent data loss and damage to the

storage device, never remove it from this
navigation system while data is being
transferred.

Pioneer cannot guarantee compatibility

with all USB mass storage devices and
assumes no responsibility for any loss of
data on media players, iPhone,
smartphone, or other devices while using
this product.

Connecting your iPod

Using the USB interface cable for iPod
enables you to connect your iPod to the
navigation system.

A USB interface cable for iPod (sold
separately) is required for connection.

For details about iPod compatibility with
this navigation system, refer to the
information on our website.

Connection via a USB hub is not possible.

1. Check that no USB storage device is

connected.

2. Connect your iPod.

USB interface cable

Disconnecting your iPod

* Pull out the USB interface cable for iPod

after checking that no data is being
accessed.

Startup and termination

1. Start the engine.

2. Press the HOME button to boot up the

system.
After a short pause, the splash screen comes
on for a few seconds.

To protect the LCD screen from damage,
be sure to touch the touch panel keys only
with your finger and do so gently.

3. Turn off the vehicle engine to terminate

the system.
The navigation system is also turned off.

On first-time startup

When you use the navigation function for the
first time, an initial setup process starts
automatically. Follow the steps below.

1. Start the engine.

2. Press the HOME button to boot up the

system.
After a short pause, the splash screen comes
on for a few seconds.

Mini-jack connector

USB interface cable for iPod

13-MAN-AVICF550-EN.fm Page 24 Monday, April 8, 2013 3:02 PM

Advertising