Pioneer AVIC-F550BT - Manual (Page 62)

62
Registering and connecting a Bluetooth device
Registering and connecting a Bluetooth device If your devices feature Bluetooth ® technology,
this navigation system can be connected to
your devices wirelessly. This section
describes how to set up a Bluetooth
connection.
Preparing communication
devices
This navigation system has a built-in function
to use devices featuring Bluetooth wireless
technology.
➲
For details, refer to “Notes for hands-free
phoning” on page 68.
You can register and use devices that feature
the following profiles with this navigation
system.
• HFP (Hands-Free Profile)
• A2DP (Advanced Audio Distribution Profile)
❒
If the registered device features both HFP
and A2DP, the hands-free connection is
made and then the Bluetooth audio
connection is made.
If the registered device features either
profile, the corresponding connection is
made.
❒ When this product is turned off, the
Bluetooth connection is also disconnected.
When the system restarts, the system
automatically attempts to reconnect the
previously-connected device. Even when
the connection is severed for some reason,
the system automatically reconnects the
specified device (except when the
connection is severed due to device
operation).
Registering and connecting
your Bluetooth devices
❒ For details on your Bluetooth device
operating procedures, refer to the
instruction manual of your device.
❒ Before registration, make sure that the
“Bluetooth” of setting item is set to “On”.
❒ Up to three Bluetooth devices can be
paired with this product.
* Use the Bluetooth setting in the Bluetooth
device to pair this product with your
Bluetooth device.
After completing pairing, Bluetooth
connection starts.
❒
The device name is “AVIC-F550BT”.
❒ The default password (PIN code) is “0000”.
Connecting a registered Bluetooth
device manually
The navigation system automatically
connects the Bluetooth device selected as the
target of connection. However, connect the
Bluetooth device manually in the following
cases:
• Two or more Bluetooth devices are
registered, and you want to manually select
the device to be used.
• You want to reconnect a disconnected
Bluetooth device.
• Connection cannot be established
automatically for some reason.
If you start connection manually, carry out the
following procedure. You can also connect
the Bluetooth device by having the navigation
system detect it automatically.
1. Activate the Bluetooth wireless
technology on your devices.
For some Bluetooth devices, no specific-
action is necessary to activate Bluetooth
wireless technology. For details, refer to the
instruction manual of your devices.
2. Tap [Connection List].
The connection list appears.
3. Tap the name of the device that you want
to connect.
4. Tap [Connect].
For details about the connectivity with the
devices featuring Bluetooth wireless
technology, refer to the information on our
website.
13-MAN-AVICF550-EN.fm Page 62 Monday, April 8, 2013 3:02 PM