Pioneer PD-50-S - Manual (Page 6)

Connecting up 02
6
En
Plugging in
Important
• If it is necessary to detach the power cord, first be
sure to press the /I STANDBY/ON button on the
front panel of the unit so the PD-50 is turned OFF.
• Confirm that the [-OFF-] indicator is not lighted in
the main unit’s front panel display before
disconnecting the power cord. If the power cord is
disconnected while the [-OFF-] indicator is still
lighted, the unit’s settings may revert to factory
defaults.
• When going on a trip or otherwise not using the
unit for an extended period, always disconnect the
power cord from its outlet.
Caution
• Do not use any power cord other than the one
supplied with this unit.
• Do not use the supplied power cord for any purpose
other than that described below.
After you’ve finished making all connections, plug the
unit into an AC outlet.
1 Plug the supplied power cord into the
AC IN socket on the rear of the unit.
2 Plug the other end into AC outlet.
To AC outlet
Power cord
(included)
PD-50’s rear panel
PD-50_PWSYXZT8.book 6 ページ ２０１２年７月６日 金曜日 午前１１時１２分