Pioneer LX01BD - Manual (Page 48)

10
48
En
Chapter 10
Additional information
Important
• Press SYSTEM CONTROL to set the remote control to receiver
control mode in order to operate the receiver subwoofer (make
sure that the LCD displays the
SYSTEM screen, as shown
below).
Dimming the display
You can choose to dim the display of the display unit if you find it too
bright.
1 Press SETUP.
2 Select ‘System Setup’.
Use / to select, then press ENTER.
3 Select ‘Dimmer’.
Use / to select, then press ENTER.
4 Select ‘Dimmer Light’ or ‘Dimmer Dark’.
Use / to select, then press ENTER to confirm.
Note
• The display of the display unit dims when the sleep timer is set,
regardless of this setting.
Setting the sleep timer
The sleep timer switches off the receiver subwoofer after a specified
time so you can fall asleep without worrying about it.
 Press SLEEP to select an option.
Choose between the following options:
• Sleep On – Switches off after about an hour
• Sleep Off – Cancels the sleep timer
After selecting Sleep On, you can press SLEEP again to check how
much time is left. Each line indicates approximately 12 minutes
(remaining):
Note
• The display of the display unit dims when the sleep timer is set.
The Blu-ray disc player does not automatically switch off with
the sleep timer.
VOL MUTE
GUIDE INFO
VOL
SYSTEM
SYSTEM
CONTROL
TV
SYSTEM
CONTROL
SYSTEM
SURR
ADV.
SURR
F.S.
SURR
SETUP
HOME
MENU
RETURN
SETUP
SETUP
TOP MENU
DISC
NAVIGATOR
HOME
MENU
TOOLS
MENU
RETURN
SETUP
TOP MENU
DISC
NAVIGATOR
HOME
MENU
TOOLS
MENU
RETURN
SLEEP EXIT
MCACC SOUND TEST
TONE
SLEEP
S l e e p - - - - -
LX01BD_1.book Page 48 Tuesday, September 2, 2008 12:33 PM