Adjusting the audio drc, Closing the video adjust screen, About pure cinema – Pioneer LX01BD User Manual

Page 80: Closing the audio drc screen

Advertising
background image

04

80

En

Note

Prog.Motion and Pure Cinema have the effect only for pictures
recorded in the interlaced scan format (576i/480i or 1080i
signals).

Prog.Motion is disabled when Pure Cinema is set to On.

Black Setup have the effect only for pictures output from the
VIDEO and S-VIDEO output terminals, and for NTSC signals
output.

YNR, CNR, BNR and MNR are disabled when 1080/24p signals
are output from the

HDMI OUT terminal.

Closing the Video Adjust screen

Press

HOME MENU.

About Pure Cinema

There are two types of video signals:

Video material – Video signals recorded at 25 or 30 frames/
second

Film material – Video signals recorded at 24 frames/second

“Pure Cinema” uses signal processing suited for “film material”
when converting 576i/480i or 1080i interlaced video signals into
progressive video signals, resulting in clear picture reproduction
without losing the quality of the material.

is displayed on the disc information screen when playing the

“film material” pictures of DVD-Video discs (page 70).

Adjusting the Audio DRC

Audio DRC (Dynamic Range Control) has the effect of playing loud
sounds softly and soft sounds loudly. Adjust the setting for example
when watching movies late at night and the dialogs are difficult to
hear.

1

During playback, display the TOOLS menu.

Press

TOOLS.

2

Select and set Audio DRC.

Use

/ to select, then press ENTER.

3

Adjust the setting.

Use

/ to switch between Off, Low, Medium, High and Auto.

Closing the Audio DRC screen

Press

ENTER or HOME MENU.

Note

• This only affects the Dolby TrueHD, Dolby Digital Plus and Dolby

Digital audio signals of BDs, DVDs and movie files.

• When

Auto is selected, the setting has the same effect as High

or

Off for Dolby TrueHD signals, depending on the content. For

Dolby Digital Plus and Dolby Digital, the setting has the same
effect as

Off.

• Audio DRC affects the audio signals output from the following

audio output terminals:

– Analog audio signals output from the

AUDIO OUT (2 ch) or

AUDIO OUT (7.1 ch) terminals.

– Linear PCM audio signals output from the

DIGITAL OUT

terminals or

HDMI OUT terminal.

• The effect may be weak for some discs.

PAGE

TOP MENU

DISC

NAVIGATOR

DISPLAY

LIGHT

TOOLS

MENU

TOOLS

SETUP

TOP MENU

DISC

NAVIGATOR

HOME
MENU

TOOLS

MENU

RETURN

Audio

Subtitle

Audio DRC

Video Adjust

Output Video Resolution

BD PLAYER
TOOLS

SETUP

TOP MENU

DISC

NAVIGATOR

HOME
MENU

TOOLS

MENU

RETURN

Audio DRC

Off

Adjust the audio dynamic range. This setting is

ineffective depending on the playing audio.

LX01BD_2.book Page 80 Friday, September 5, 2008 11:29 AM

Advertising