Connect the speaker system, When not using the supplied speaker bases – Pioneer LX01BD User Manual

Page 9

Advertising
background image

9

En

01

When not using the supplied speaker
bases

Attach the non-skid pads to the base of each of the front/
center and surround speakers (as shown).
Use the adhesive side of the pads to attach them to the base of each
speaker.

Connect the speaker system

Refer to Basic connections on page 12 to connect the speakers
properly. After connecting everything, place the speakers as shown
in the diagram above for optimal surround sound. After placing the
speakers, run the Auto MCACC setup (page 26) to complete your
surround sound setup.

Additional notes on speaker
placement

• Install the main front left and right speakers at an equal distance

from the TV.

• When using the Standard surround setup, install the surround

speakers slightly above ear level for optimum effect.

• When using the Front surround setup, separate the left and right

speakers by about 1.5 m for optimum effect.

Precautions:

• Do not place the speaker on an unstable surface, as doing so

may cause the speaker to fall and cause damage or bodily injury.

• All speakers supplied with this system are magnetically

shielded. However, depending on the installation location, color
distortion may occur if a speaker is installed extremely close to
the screen of a television set. If this happens, turn the power
switch of the television set OFF, and turn it ON after 15 min to 30
min. If the problem persists, place the speaker system away
from the television set.

• For safety, make sure that there is no exposed bare speaker wire

outside of the speaker terminals.

• Do not connect the supplied speakers with any other amplifier.

This may result in malfunction or fire.

• Do not connect any speakers other than those supplied to this

system.

• The speaker system grill cannot be removed. Do not try to

forcibly remove it since doing so may damage the grille.

• When cleaning the cabinet, use the provided cleaning cloth.

Do not allow alcohol, thinner, benzene, or insecticides to come
into contact with the surface, since finish discoloration may
occur.
Also, when using chemically impregnated cleaning cloths,
follow their precautions carefully.

Non-skid pads x16

Front/center and

surround speakers

LX01BD_1.book Page 9 Tuesday, September 2, 2008 12:33 PM

Advertising