Pioneer LX01BD - Manual (Page 85)

85
En
05
Changing the speaker setup
Set whether or not to use the speakers which are connected to the
AV receiver or amplifier, as well as the size of the speakers. This
setting is only valid for analog audio outputs.
Note
• Normally there is no need to perform this setting on this system.
• Select Initial Setup from the HOME MENU, then press ENTER.
1 Select and set Speakers.
Use / to select, then press ENTER.
2 Select and set Speaker Setup  Next Screen.
Use
/ to select, then press ENTER.
Caution
• This cannot be selected when Audio Output Mode is set to
2 Channel. Change the setting to Multi-channel (page 82).
3 Select the speaker and change the setting.
Use / to select, then use / to change the setting.
• L/R (front left and right speakers): Small/Large (this setting also
applies to the C, SL/SR and SBL/SBR speakers)
• C (center speaker): Yes/No
• SL/SR (left and right surround speakers): Yes/No
• SBL/SBR (left and right surround back speakers): Yes/No
 Closing the speaker settings screen
Press ENTER.
Adjusting the output level of the
various speakers (Channel Level)
Adjust each output level of the different speakers by using test tones.
This setting is only valid for analog audio outputs.
1 Select and set Speakers.
Use / to select, then press ENTER.
2 Select and set Channel Level, then Fix or Variable.
Use / to select, then press ENTER.
• Fix – The output level of all the speakers is set to the maximum.
• Variable – The output level of all the speakers is set 6.0 dB lower
than when
Fix is selected. From this point, the output levels of
the L, C, R, SL, SR, SBL, SBR and SW speakers can be adjusted
within the range of –6.0 dB to +6.0 dB.
• If you have selected Variable, proceed to step 3.
Caution
• This cannot be selected when Audio Output Mode is set to
2 Channel. Change the setting to Multi-channel (page 82).
3 Select and set the method for switching the speaker to be
adjusted.
Use
/ to select, then press ENTER.
SETUP
TOP MENU
DISC
NAVIGATOR
HOME
MENU
TOOLS
MENU
RETURN
Audio Output Mode
Speaker Setup
Channel Level
Multi-channel
Fix
Video Out
Audio Out
Speakers
HDMI
Language
Parental Lock
Options
Setup Navigator
Initial Setup
BD PLAYER
SETUP
TOP MENU
DISC
NAVIGATOR
HOME
MENU
TOOLS
MENU
RETURN
L/R
C
SL/SR
SBL/SBR
Large
Yes
Yes
Yes
Speaker Setup
BD PLAYER
Use [ ][ ] to select a speaker, then press [ ][ ]
to select speaker option.
SETUP
TOP MENU
DISC
NAVIGATOR
HOME
MENU
TOOLS
MENU
RETURN
Audio Output Mode
Speaker Setup
Channel Level
Multi-channel
Fix
Video Out
Audio Out
Speakers
HDMI
Language
Parental Lock
Options
Setup Navigator
Initial Setup
BD PLAYER
SETUP
TOP MENU
DISC
NAVIGATOR
HOME
MENU
TOOLS
MENU
RETURN
Test Tone Switching
Select whether test tone output is
switched automatically or manually.
Video Out
Audio Out
Speakers
HDMI
Language
Parental Lock
Options
Setup Navigator
Speaker Setup
BD PLAYER
Auto Manual
LX01BD_2.book Page 85 Friday, September 5, 2008 11:29 AM