Pioneer VSX-D510 - Manual (Page 10)

10
En
Connecting Speakers
A full complement of six speakers is shown here but, naturally, everyone’s home setup will vary. Simply connect the
speakers you have in the manner described below. The receiver will work with just two stereo speakers (called “front”
speakers in the diagram) but using at least three speakers is recommended, and all five is best.
Make sure you connect the speaker on the right to the right terminal and the speaker on the left to the left terminal.
Also make sure the positive and negative (+/–) terminals on the receiver match those on the speakers.
MEMO:
• Use speakers with a nominal impedance of 8
Ω
to 16
Ω
.
Connecting Your Equipment
L R
L R
R L
SURROUND
SPEAKERS
CENTER
SPEAKER
AC OUTLET L R
FRONT
SPEAKERS TO
MONTOR
TV
VCR /
DVR
CONTROL
CD IN
IN IN OUT
OUT
FRONT
CD - R
/ TAPE
/ MD
SURROUND
CENTER
SUB
WOOFER
SUB
WOOFER
PREOUT
IN
IN
IN
IN
IN
TV /
SAT
DVD
/ LD
COAX OPT
(DVD) (CD)
P
L
A
Y
OUT
FM
UNBAL
75 Ω
AM LOOP
ANTENNA
FM
ANTENNA
DVD 5.1 CH
INPUT
PCM / 2 / DTS
DIGITAL IN
ASSIGNABLE
INPUT
Be sure to complete all other
connections before connecting this
unit to the AC power source.
Front Speakers Center Speaker SURROUND Speakers
Powered sub woofer
L R C SR SL
When using the speaker on your TV as the center
speaker, connect the CENTER PREOUT jack on this unit
to the audio input jack on your TV. In this case, the
center C speaker shown is unnecessary.