Brocade Communications Systems Brocade ICX 6650 - Manual (Page 292)

274 Brocade ICX 6650 Administration Guide
53-1002600-01
Syslog messages
A
Alert MAC Authentication failed for
<mac-address> on <portnum> (No VLAN
Info received from RADIUS server) RADIUS authentication was successful for
the specified <mac-address> on the
specified <portnum>; however, dynamic
VLAN assignment was enabled for the port,
but the RADIUS Access-Accept message did
not include VLAN information. This is
treated as an authentication failure.
Alert MAC Authentication failed for
<mac-address> on <portnum> (Port is
already in another radius given vlan) RADIUS authentication was successful for
the specified <mac-address> on the
specified <portnum>; however, the RADIUS
Access-Accept message specified a VLAN
ID, although the port had previously been
moved to a different RADIUS-assigned
VLAN. This is treated as an authentication
failure.
Alert MAC Authentication failed for
<mac-address> on <portnum> (RADIUS
given vlan does not exist) RADIUS authentication was successful for
the specified <mac-address> on the
specified <portnum>; however, the RADIUS
Access-Accept message specified a VLAN
that does not exist in the Brocade
configuration. This is treated as an
authentication failure.
Alert MAC Authentication failed for
<mac-address> on <portnum> (RADIUS
given VLAN does not match with TAGGED
vlan) Multi-device port authentication failed for
the <mac-address> on a tagged port
because the packet with this MAC address
as the source was tagged with a VLAN ID
different from the RADIUS-supplied VLAN
ID.
Alert Management module at slot <slot-num>
state changed from <module-state> to
<module-state>. Indicates a state change in a management
module.
The <slot-num> indicates the chassis slot
containing the module.
The <module-state> can be one of the
following:
•
active
•
standby
•
crashed
•
coming-up
•
unknown
Alert OSPF LSA Overflow, LSA Type =
<lsa-type> Indicates an LSA database overflow.
The <lsa-type> parameter indicates the
type of LSA that experienced the overflow
condition. The LSA type is one of the
following:
•
1 – Router
•
2 – Network
•
3 – Summary
•
4 – Summary
•
5 – External
Alert OSPF Memory Overflow OSPF has run out of memory.
TABLE 57 Brocade Syslog messages (Continued)
Message level Message Explanation