Keyboard, Lcd panel – Toshiba Satellite 2430-301 User Manual

Page 131

Advertising
background image

Troubleshooting

Satellite 2430 Series

8-7

Satellite 2430 Series

Version

1

Last Saved on 04/04/2003 13:35

ENGLISH using Euro_M.dot –– Printed on 04/04/2003 as IM_243EN

Keyboard

Keyboard problems can be caused by your setup configuration. For more
information refer to Chapter 5, The Keyboard.

Problem Procedure

Some letter keys
produce numbers

Check that the numeric keypad overlay is not
selected. Press Fn + F10 and try typing again.

Output to screen is
garbled

Make sure the software you are using is not
remapping the keyboard. Remapping involves
reassigning the meaning of each key. See your
software’s documentation.
If you are still unable to use the keyboard,
consult your dealer.

LCD panel

Problem Procedure

Lines appear broken

Check if you are in DOS mode. In DOS, lines
may appear broken, because of the LCD
screen’s higher resolution. The Windows display
should appear normal.

No display

Press hotkeys Fn + F5 to change the display
priority, to make sure it is not set for an external
monitor.
Make sure instant security was not activated. Try
entering your password, if you have one
registered. Or, turn the power off and back on to
clear instant security.

Problems above
remain unresolved or
other problems occur

Refer to your software’s documentation to
determine if the software is causing the difficulty.
Contact your dealer if the problems continue.

Advertising
This manual is related to the following products: