Toshiba Satellite 2430-301 - Manual (Page 139)

Troubleshooting
Satellite 2430 Series 8-15
Satellite 2430 Series Version
1
Last Saved on 04/04/2003 13:35
ENGLISH using Euro_M.dot –– Printed on 04/04/2003 as IM_243EN
Sound system
Problem Procedure
No sound is heard Adjust the volume control dial.
Check the software volume settings.
Make sure the headphone connection is secure.
Check Windows Device Manager. Make sure the
sound function is enabled and that settings for
I/O address, Interrupt level and DMA are correct
for your software and do not conflict with other
hardware devices that you have connected to
the computer.
If problems persist, contact your dealer.
Pointing device
If you are using a USB mouse, also refer to the USB section in this
chapter and to your mouse documentation.
Touch pad
Problem Procedure
On-screen pointer
does not respond to
Pad operation The system might be busy. If the pointer is
shaped as an hourglass, wait for it to resume its
normal shape and try again to move it. You may
also press FN + F9 to enable the Touch pad and
then try again to move it.
Double-tapping does
not work Try changing the double-click speed in the
mouse control utility.
Open the Control Panel, select the Mouse icon
and press Enter.
1.
Click the Buttons tab.
2. Set the double-click speed as instructed and
click OK.
The mouse pointer
moves too fast or too
slow Try changing the speed setting in the mouse
control utility.
1.
Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Pointer Options tab.
3. Set the speed as instructed and click OK.
If problems persist, contact your dealer.