Toshiba Satellite 2430-301 - Manual (Page 66)

Getting Started
Satellite 2430 Series 3-11
Satellite 2430 Series Version
1
Last Saved on 04/04/2003 13:35
ENGLISH using Euro_M.dot –– Printed on 04/04/2003 as IM_243EN
Benefits of standby
The standby feature provides the following benefits:
■ Restores the previous working environment more rapidly than does
hibernation.
■ Saves power by shutting down the system when the computer
receives no input or hardware access for the duration set by the
System Standby feature.
■ You can use the panel power off feature.
Executing standby
You can also enable Standby by pressing Fn + F3. See Chapter 5,
Keyboard, for details.
You can enter standby mode in one of three ways:
1.
Click start, click Turn Off Computer and click Stand by.
2. Close the display panel. This feature must be enabled. To enable it,
select the TOSHIBA Power Management Utility icon in the Control
Panel and select the Advanced tab and then set your Power Buttons
options to Standby.
3. Press the power button. This feature must be enabled. To enable it,
select the TOSHIBA Power Management Utility icon in the Control
Panel and select the Advanced tab.
When you turn the power back on, you can continue where you left when
you shut down the computer.
When the computer is shut down in standby mode, the power indicator
glows orange.
If you are operating the computer on battery power, you can lengthen the
operating time by shutting down in hibernation mode. Standby mode
consumes more power.
Standby limitations
Standby will not function under the following conditions:
■ Power is turned back on immediately after shutting down.
■ Memory circuits are exposed to static electricity or electrical noise.