Toshiba Satellite 2430-301 - Manual (Page 185)

AT Commands
Satellite 2430 Series H-13
Satellite 2430 Series Version
1
Last Saved on 04/04/2003 13:35
ENGLISH using Euro_M.dot –– Printed on 04/04/2003 as IM_243EN
\Qn Local flow control selection
\Q0 Disable flow control.
\Q1 XON/XOFF software flow control.
\Q3 CTS/RTS to DTE (default).
Result Codes:
OK
n=0,1,3
ERROR Otherwise
\Vn Protocol result code
\V0 Disable protocol result code appended to DCE speed.
\V1 Enable protocol result code appended to DCE speed
(default).
Result Codes:
OK n=0,1
ERROR Otherwise
%B View numbers in blacklist
This command displays the phone numbers for which
connections have failed. If you are using the modem in a country
that does not require blacklisting, an error code results when you
execute this command.
Refer to table H-1 for country-specific codes.
%Cn Data compression control
This command determines the operation of V.42bis and MNP
class 5 data compression. On-line changes do not take effect
until a disconnect occurs first.
%C0
V.42bis/MNP 5 disabled. No data compression.
%C1 V.42bis/MNP 5 enabled. Data compression enabled
(default).
Result Codes:
OK
n=0,1
ERROR Otherwise