Basic functions, Optical theft protection, Changing the dsc access code – Blaupunkt AntaresT60 User Manual
Page 14: Resetting personal settings, Connecting auxiliary equipment
14
BASIC FUNCTIONS
Optical theft protection
You can select whether or not the card tongue
should flash as optical theft protection.
➮
Press OK to access the DSC menu.
➮
Press / to select the menu item
Setup
.
➮
Press OK.
➮
Press / to select the menu item
Card
LED
.
➮
Press OK.
➮
Press / to select
Off
or
On
.
➮
Press OK.
➮
Press SRC to exit the DSC menu.
Changing the DSC access code
Before you can make any changes to impor-
tant settings in the DSC menu, you will be
required to enter a code. This code is set to
0000 at the factory. You can alter this code at
any time.
➮
Press OK to access the DSC menu.
➮
Press / to select the menu item
Setup
.
➮
Press OK.
➮
Press / to select the menu item
Change code
.
➮
Press OK.
➮
Use the number keys to enter the factory
code, or if the code has already been
changed, the currently valid code.
➮
Use the number keys to enter the new
code.
➮
Enter the new code a second time.
➮
Press SRC to exit the DSC menu.
Resetting personal settings
You can reset any of the settings made in the
DSC menu for the radio, the phone or the SIM
card.
➮
Press OK to access the DSC menu.
➮
Press / to select the menu item
Setup
.
➮
Press OK.
➮
Press / to select the menu item
Reset
.
➮
Press OK.
➮
Use the number keys to enter the DSC
access code.
➮
Press / to select the desired setting.
➮
Press OK twice.
➮
Press SRC to exit the DSC menu.
Connecting auxiliary equipment
In place of a CD changer, you can also con-
nect any other auxiliary audio source with a
line output. These sources include a portable
CD player, MiniDisc player or MP3 player.
To connect an external audio source, you
need an adapter cable. You can purchase an
adapter cable from any authorised Blaupunkt
dealer.
Switching the auxiliary equipment on/off
➮
During radio operation, press OK to ac-
cess the DSC menu.
➮
Press / to select the menu item
Radio
.
➮
Press OK.
➮
Press / to select the menu item
Aux
.
➮
Press OK.
➮
Press / to select
Off
or
On
.
➮
Press OK.
➮
Press SRC to exit the DSC menu.
If the auxiliary audio source is connected
properly and switched on in the DSC menu,
it can be selected by pressing SRC.