Blaupunkt AntaresT60 - Manual (Page 27)

27
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Using the telephone
Dialing phone numbers
You can dial phone numbers in four different
ways:
● Manual dialing
● One-touch dialing
● Speed-dial and
● Selecting numbers from the phone
book.
Manual dialing
➮
Use the 0 - 9 number keys to enter the
number you want to dial, including the
area code.
➮
If you enter an incorrect digit by mistake,
you can press CLR, and to correct
your mistake.
➮
Once you can see the complete number
in the display, press
.
The Radiophone will now dial the number.
Note:
When you dial numbers in the GSM network,
you are always required to dial the area code
first. Even if you dial the mobile phone number
of a subscriber in the same network, you must
still dial the area code first. The only numbers
which do not require an area code are the
service numbers supplied to you by your pro-
vider.
One-touch dialing (from the Radiophone
memory)
You can dial the phone numbers stored for
keys 1 to 9 on your Radiophone at the touch
of a button.
➮
Press down the corresponding key from
1 - 9 to dial the number stored in the
Radiophone memory.
The corresponding number or the name en-
tered for the number will appear in the dis-
play and the dialing process will begin.
Speed-dial (from the SIM card memory)
You can dial the phone numbers stored for
keys 1 to 9 on your SIM card at the touch of a
button.
➮
Press * .
➮
Press down the corresponding key from
1 - 9 to dial the number stored in the
SIM card memory.
The corresponding number or the name en-
tered for the number will appear in the dis-
play and the dialing process will begin.
Selecting a number from the phone book
Telephone numbers that you have already
stored in the phone book can also be selected
directly. For more information on storing num-
bers and names in the phone book, please
refer to the chapter entitled “Phone book”.
➮
While the Radiophone is in the tel-
ephone mode, press MEM.
The phone book will appear. You can choose
as to whether you want to find the entry by its
name or its position in the memory.
➮
Press to select the search method
you want to use.
➮
Press OK.
Finding an entry by name
If you select the option Find entry by name ,
you will be required to enter the first few let-
ters of the name.
➮
Use the 0 - 9 keys to enter up to the first
three letters of the entry. For more infor-
mation, read the section on “Entering
names and telephone numbers” in the
chapter entitled “Phone book”.
➮
Press OK.
The corresponding section of the phone book
will appear in the display. If there is no entry
matching the letters entered, the section with
the next closest letter will appear.
➮
Use / to select the desired entry.
➮
Press .
The Radiophone will now dial this number.
USING THE TELEPHONE