Blaupunkt AntaresT60 - Manual (Page 32)

32
You will return to the NETWORK SELEC-
TION menu.
➮
Press CLR as often as necessary until
you return to the main menu or press
and hold CLR for longer than one sec-
ond to return to the DSC menu.
Editing the network list
You can edit the network list to select pre-
ferred GSM networks.
Adding a GSM network to the list
➮
In the telephone mode, press OK.
➮
Press to select Menu .
➮
Press OK.
➮
Press to select Network sel.
➮
Press OK.
The NETWORK SELECTION menu will ap-
pear in the display.
➮
Press to select Pref. list .
➮
Press OK.
➮
Press to select Add .
➮
Press OK.
Now you can either enter a new GSM net-
work or add one which has already been
stored in the Radiophone to the list.
➮
Press to select Known or New .
Note:
If you want to add a new GSM network to the
list, you will be required to enter the network
code and the network name. Your provider
can supply you with this information.
If you select Known , a list of the factory-pro-
grammed GSM networks will appear.
➮
Press / to select the desired net-
work.
➮
Press OK.
You will return to the PREF. LIST menu.
Moving an entry on the list
➮
Select the menu item Move in the
PREF. LIST menu.
➮
Press OK.
The current network list will appear in the dis-
play.
➮
Press to select the entry you want to
move.
➮
Press OK.
➮
Press / to move the GSM network
to its new position.
➮
Press OK.
You will return to the PREF. LIST menu.
Deleting an entry on the list
➮
Select the menu item Delete in the
PREF. LIST menu.
➮
Press OK.
The current network list will appear in the dis-
play.
➮
Press to select the entry you want to
delete.
➮
Press OK.
The GSM network selected will be deleted
from the list. You will return to the
PREF. LIST
menu.
Call forwarding
You can set call forwarding for different situa-
tions.
● General call forwarding
● Call forwarding if busy
● Call forwarding if no answer
● Call forwarding if unreachable (outside
of your provider’s service area)
USING THE TELEPHONE