Blaupunkt AntaresT60 - Manual (Page 31)

31
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
What do you have to do before travelling
to a foreign country?
➮ If you have not already done so, have
your service provider activate your SIM
card for international roaming.
How do I place a telephone call to a
foreign country?
➮ Dial the corresponding country code,
➮ enter the area code and then
➮ the telephone number.
Note:
You can replace the first two digits of the coun-
try code with + (press 0 for approx. one sec-
ond).
Example:
Country code: 0049 Germany
Area code: 05121 Hildesheim
Phone number: 49 . . . . Blaupunkt
The number you
enter:
+49512149 . . . . .
Note:
Enter the country code for all the telephone
numbers you want to store.
How can I be reached?
Callers from your home country simply dial
your Radiophone number. Callers outside of
your home country must first dial your usual
country code, even if you are currently in a
foreign country.
How do I call a wired network telephone
number in the foreign country?
➮ Dial the area code and
➮ then the telephone number.
The country code is not entered because your
Radiophone has logged onto the foreign net-
work.
Selecting a network
In areas served by more than one GSM net-
work, you can select a preferred network. It is
necessary for your provider to have a roam-
ing agreement with that network. In addition,
you can also list the networks according to
priority. This can prove useful for your trips
abroad because sometimes the difference in
the charges made by the different networks
is considerable. For more information, read
the section on “Foreign calls”.
Displaying the available networks
➮
In the telephone mode, press OK.
➮
Press to select Menu .
➮
Press OK.
➮
Press to select Network sel.
➮
Press OK.
The NETWORK SELECTION menu will ap-
pear in the display.
➮
Press to select Available .
➮
Press OK.
After a short search, a list of the available
GSM networks will appear.
Adjusting the network search method
You can select whether a manual or an auto-
matic search is made for the GSM networks.
➮
In the telephone mode, press OK.
➮
Press to select Menu .
➮
Press OK.
➮
Press to select Network sel.
➮
Press OK.
The NETWORK SELECTION menu will ap-
pear in the display.
➮
Press to select Search method .
➮
Press OK.
➮
Press / to select the desired
method.
➮
Press OK.
USING THE TELEPHONE