Blaupunkt AntaresT60 - Manual (Page 25)

25
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Selecting the ringing tone
You can select from among six different ring-
ing tones:
● Up and down,
● Oktave,
● Trill,
● 2x Oktave,
● 2x Trill,
● Triad and
● Off.
➮
In the telephone mode, press OK.
The DSC menu will appear in the display. The
cursor will mark
Setup .
➮
Press OK.
➮
Press to select Ring. tones .
➮
Press OK.
The RING. TONES menu will appear in the
display.
➮
Press to select Ringing tone .
➮
Press OK.
The ringing tone currently selected will be
played repeatedly.
➮
Press / to select the desired ringing
tone.
➮
Press OK.
You will return to the RING. TONES menu.
➮
Press CLR repeatedly until you return
to the main menu or press and hold
down CLR for longer than one second
to return to the DSC menu.
Service functions
Audible call timer
With the audible call timer you can have a
signal sound at selected intervals during a
phone call. This function allows you to keep
track of the telephone costs.
The time interval for the audible call timer func-
tion can be set from 15 to 300 seconds.
➮
In the telephone mode, press OK.
The DSC menu will appear in the display. The
cursor will mark
Setup .
➮
Press OK.
➮
Press to select Audib. timer .
➮
Press OK.
The AUDIBLE CALL TIMER menu will ap-
pear. The number of seconds selected is in-
dicated after
TIMER .
➮
Press to select the desired setting
Off or TIMER .
➮
Press OK.
If you select Off , you will return to the Setup
menu.
If you select TIMER , you can set the time in-
terval for the signal sound.
Setting the timer
➮
Use the 0 - 9 keypad to enter the de-
sired interval. Use CLR to correct your
entry if necessary.
➮
Press OK.
You will return to the Setup menu.
➮
Press CLR repeatedly until you return
to the main menu or press and hold
down CLR for longer than one second
to return to the DSC menu.
TELEPHONE SETTINGS