Starting the lamp – Bad Boy Mowers BAD BOY 02.9812.0001C User Manual
Page 35
I
NSTALLATION
: P
OWER
U
P
AND
B
ASIC
S
ETUP
P
ROCEDURES
0 2. 9 8 1 2. 0 0 01 C
25
2
Starting the Lamp
The lamp can be started (turned on) via console command or at the luminaire itself by using the Menu
Touchscreen.
To start lamp using Menu Touchscreen:
Step 1. At Home screen, press LAMP panel.
Step 2. At Lamp screen, current lamp status (ON/OFF) will be displayed. Press START to bring up
YES/NO options.
Figure 2-16: Starting the Lamp
Step 3. Press YES to start lamp.
Lamp Operation Settings
The luminaire can also be configured to power up with its lamp on or off, and the maximum lamp
power level can be set via the Lamp screen. For details about all lamp configuration options, refer to
Lamp Warm-Up
By default, the lamp is configured for a 3 minute warm-up period at 840W. To override this setting, use
the control channel options (refer to