Bad Boy Mowers BAD BOY 02.9812.0001C - Manual (Page 38)

B AD B OY ™ S POT L UMINAIRE U SER M ANUAL
2 8 02.9812.0001C
Step 3. For each Handle Assembly, feed Lanyard through yoke handle, then feed Handle through
loop as shown in Figure 2-18 .
Step 4. Thread Handles into Handle Mounts.
Figure 2-18: Installing Follow Spot Handles - Step 2
Enabling Pan/Tilt Free Mode
At Pan/Tilt Menu:
A "Free" mode is available at the Pan/Tilt Menu screen so that the
luminaire may be used as a follow spot fixture.
The FREE panel displays the current "free" setting. Press to bring
up Yes/No options. Yes will enable "free" control, which allows the
luminaire to be used as a follow spot.
Refer to
"Pan/Tilt Screen" on page 35 for additional information
about the Pan/Tilt Menu items.
Using Control Channels:
The Free mode may also be enabled/disabled using control
channels. Refer to
"Control Channels" on page 41.
Follow Spot
Lanyard Yoke Handle
Handle Assembly
Pan/Tilt Screen