3camera reference, 1 introduction – Bosch MegaPixel IP Camera NWC-0900 User Manual

Page 14

Advertising
background image

12 en | Camera reference

MegaPixel IP Cameras

F.01U.064.422 | V 1.0 | 2007.03

User Manual

Bosch Security Systems

3

Camera reference

3.1

Introduction

NWC-0700, NWC-0800 and NWC-0900 are megapixel resolution

IP cameras capable of delivering crisp, low-noise images at a

video frame rate.
NWC-0700 is a 2-megapixel resolution camera having maximum

resolution of 1600 by 1200 and achieving a maximum frame

rate of 24.
NWC-0800 is a 3.1-megapixel resolution camera having maxi-

mum resolution of 2048 by 1536. It is typically viewed at 1920

by 1200 resolution with the frame rate up to 20.
NWC-0900 is a dual-sensor, day-night camera featuring a 3.1-

megapixel color sensor paired with a 1.3-megapixel mono-

chrome sensor sensitive to near infrared illumination. When the

scene is well illuminated, the 3.1-megapixel sensor is selected

to deliver color images of up to 2048x1536 pixels. To provide

seamless transition between day and night modes, the color

sensor is set to default resolution of 1920x1200 pixels. In low-

light conditions, NWC-0900 can automatically switch to the 1.3-

megapixel (1280x1024) monochrome sensor, enabling the

delivery of clear imagery at illumination levels as low as 0.01

lux. NWC-0900 typically delivers 20 fps in day mode and over

30 fps in night mode.
All cameras are equipped with LAN connector and can deliver

image data at a maximum data rate of up to 55 Mbps. Images

are sent over the network in a compressed Motion JPEG format

using TFTP protocol with the supplied software or using HTTP

protocol with DiBos8.
Power for all cameras can be supplied via DC jack (+9 V to

+12 V) or Power over Ethernet.

All cameras feature:

Automatic exposure (AE) and Gain (AGC) control

Automatic backlight compensation

Automatic multi-matrix white balance

50/60 Hz selectable flicker control

Electronic pan, tilt, and zoom (PTZ)

!

CAUTION! Medium risk:

Never supply power via the Ethernet connection (PoE) when

power is already supplied via the power connector.

Advertising
This manual is related to the following products: