Bosch MegaPixel IP Camera NWC-0900 - Manual (Page 34)

32 en | Software MegaPixel IP Cameras
F.01U.064.422 | V 1.0 | 2007.03 User Manual Bosch Security Systems
4.2.9 Advanced
"Use DirectX if possible" is an
option to use DirectX func-
tions that utilize graphics card
hardware to display images,
instead of using the software.
This reduces the load on the
CPU. The drop-down list
"DirectX size" provides options
for the graphics area size sup-
ported by DirectX.
"Auto - Startup" is an option to
start the Bosch Video System
automatically when Windows
starts up.
"RealTime if folded" is an
option to continue running the
Bosch Video System applica-
tion at the top priority level in
the Windows Task Manager,
after the application was mini-
mized and placed into the sys-
tem tray of the Windows task
bar.
"Show motion" is an option to
mark the areas of the image
where motion was detected.
"Use double packets" is an
option to use data packets
with 2904 bytes instead of the
regular 1450 bytes for image
transmission. This allows for
the increase of image trans-
mission bandwidth, but may
lead to a less stable perfor-
mance on overloaded net-
works.
"Warning on disconnect" is an option to display a red screen
warning in place of live video that has been disconnected or
temporarily lost. When disabled, the Video System displays the
last captured frame.
"Static ARP" is an option to enable a static link between the
camera's MAC address and its IP address.
“Don't update sensor window" is an option that determines
how the changes to the image size are applied: at a software
level or in hardware (the image sensor). Enabling this option