Bosch MegaPixel IP Camera NWC-0900 - Manual (Page 23)

MegaPixel IP CamerasSoftware | en 21
Bosch Security Systems User Manual F.01U.064.422 | V 1.0 | 2007.03
Now the image numbers, MAC, and IP addresses are displayed
in the pop up window.
4.2 Operating Bosch Video System
Note: The Bosch Video System is provided as a tool for setting
up the megapixel cameras. The program is license free with
archiving and playback functions disabled. For extensive
recording and playback functions, the DiBos8 system should be
used.
After the cameras are successfully installed using the Camera
Installer, the Video System can be activated by clicking on the
corresponding Run button in the Application Manager.The
BOSCH Video System screen will then appear and, if applicable,
a pop-up message warning that the display resolution is differ-
ent from camera resolution. Click OK; the images are automati-
cally scaled to the available screen resolution. Shown below is
the Bosch Video System showing video display area for one
camera.
Fig. 4.5 Bosch Video System showing video display area for one camera
4.2.1 Toolbar
The toolbar of the Bosch Video System is located in the upper
portion of the screen above the video display area. It contains
the following icons: