Bosch MegaPixel IP Camera NWC-0900 - Manual (Page 41)

MegaPixel IP CamerasSoftware | en 39
Bosch Security Systems User Manual F.01U.064.422 | V 1.0 | 2007.03
In the settings menu of the Bosch Video System software, first
select ‘Archive’ and verify that the Filter is selected to "Save all
and mark motion". Next, select ‘Motion Detection’ and verify
that "Detected by Camera" is selected and the motion detection
parameters are set. The megapixel camera sends the ‘Motion
Detection’ trigger to the IP address of the client that last
accessed the camera.
4.3.2 Setting up DiBos8 for Megapixel Cameras
Bosch Megapixel cameras are added as JPEG IP cameras in the
Network Devices section. The screens to set up are accessible
in the “Video and audio” connection screen of Configuration.
1.
Mark ‘Network’ and click the "Add" button in the JPEG IP
cameras field.
2. Mark the newly created IP camera in the Network tree and
click the "Edit" button in the JPEG IP cameras field.
3. The Settings screen will now open.
Fig. 4.8 Settings screen in DiBos8
4. In the settings screen enter the address followed by a
string of parameters as defined in the HTTP command
string parameters section below:
a.
Edit the Camera name if necessary.
b. Select the number of images per second for live view-
ing.