Bosch MegaPixel IP Camera NWC-0900 - Manual (Page 30)

28 en | Software MegaPixel IP Cameras
F.01U.064.422 | V 1.0 | 2007.03 User Manual Bosch Security Systems
"Rotate 180" is an option for flipping the image vertically and
horizontally such that it is rotated 180 degrees.
4.2.6 Archive
Archive is a lower-level menu that is not functional in this soft-
ware version.
Motion Detection is enabled by
making the following ‘Filter’
selections:
“Save all frames” disables
Motion Detection.
“Save all and mark motion”
enables motion detection.
Select this one when DiBos8 is
used with motion-triggered
recording.
“Save only motion”. With
motion detection selected to
"Detected by Camera", the cam-
era will only output the images
triggered by the motion detec-
tion function in the camera.
Select ‘Frequency’ to Max in
order to enable a high frame
rate for the Motion Detection
window.
4.2.7 Motion Detection
Motion detection is achieved by analyzing inter-frame bright-
ness changes on a pixel-by-pixel basis. There are two modes of
Motion Detection supported in Bosch Video System: a software
mode and an in-camera mode.
–
The software mode performs motion detection by process-
ing the images after transmission from the camera to the
computer and works on live images only. In contrast, the
in-camera mode performs motion detection prior to trans-