Bosch MegaPixel IP Camera NWC-0900 - Manual (Page 24)

22 en | Software MegaPixel IP Cameras
F.01U.064.422 | V 1.0 | 2007.03 User Manual Bosch Security Systems
Turns on/off a drop-down list of the installed cameras.
Individual cameras are disabled/enabled by left double-
clicking on the camera number. When disabled, a live
video image from the disabled camera is replaced with
a blue rectangle, and the camera number in the drop-
down list is marked with a red cross.
Displays the Settings menu (see Settings section
below).
Enables a full screen display without the toolbar and
menus. Return to window display by clicking the dedi-
cated icon in the pop-up window or by the Esc button.
Selects screen layout for viewing live video from multiple cam-
eras (from left to right):
– single camera layout; 2x2 camera layout; 3x3 camera
layout; 4x4 camera layout;
– 10-camera layout with 2 large and 4x2 smaller images;
– 8-camera layout with 1 large, 3x1 and 1x4 smaller
images;
– 13-camera layout with 1 large, 2x2 and 4x2 smaller
images.
Depending on the chosen screen layout and the actual number
of installed cameras, the unused sections of the layout will be
empty blue screens.
Displays the archive controls (not operative in this
software version). These are explained in
Section 4.2.6 Archive.
Takes a snapshot of live video. The snapshot is taken
from the camera which is highlighted in the drop-
down list of the installed cameras (see above). To
highlight another camera, left-click on the camera
number; to take the snapshot from all cameras, highlight "cam-
eras" at the root (top) of the drop-down camera list. The snap-
shot file names contain the camera number, date, and time of
the snapshot. To locate/view the snapshots in the snapshot
folder, right-click anywhere on screen, then select "photo,"