Sharp MX-2614N - Manual (Page 673)

7-5
SYSTEM SETTINGS
Contents
This section describes the system settings that can be configured by general users of the machine.
Accessing the System Settings (General)
Make sure that the machine is in the standby state and
then touch the [SYSTEM SETTINGS] key
( ) on the
touch panel.
When the [SYSTEM SETTINGS] key
( ) is touched,
the following menu screen appears on the touch panel.
Touch the item in this screen that you wish to configure.
For detailed explanations of each of the settings, see the
following pages of this chapter.
SYSTEM SETTINGS (GENERAL)
System Settings Exit Admin Password
Total Count Default Settings
Address Control
USB-Device Check
List Print
(User)
Fax Data
Receive/Forward
Paper Tray
Settings
Printer Condition
Settings
Document Filing
Control
• To quit the system settings, touch the [Exit] key in the top right corner of the screen.
• For the procedure to follow when user authentication is enabled, see " USER AUTHENTICATION " (page 1-17) in
"1. BEFORE USING THE MACHINE".