Sharp LC-60UQ10KN - Manual (Page 31)

29
VIDEO connection
Example of connectable devices
E VCR
E DVD player/recorder
E Game console
E Camcorder
You can use the EXT 2 terminal when connecting to a game console, camcorder,
a DVD player/recorder or other device.
n
AV cable (commercially available)
Audio connections
Speaker/amplifier connection
Connect an amplifier with external speakers as shown below.
E Connecting an amplifier with digital/analogue audio inputs
n
Stereo conversion cable (for analogue audio) (commercially available)
o
Optical audio cable (for digital audio) (commercially available)
* This terminal is also used for headphones. Reduce the volume before using
headphones. Overwhelming sound may damage your hearing.
NOTE
• If the image is not in sync with the audio, check the settings of the connected surround
system.
E After connecting
Digital audio output setting
After connecting an amplifier with digital audio input and external speakers
as shown, you should set an audio output format compatible with the
programme you are watching or the device connected.
Go to “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Digital
audio output” > select “PCM” or “Bitstream”.
NOTE
• When set to “Bitstream”, Dolby Digital is output when the Dolby Digital or Dolby
Digital Plus audio formats are received or DTS is output when DTS audio formats
are received. When set to “PCM”, PCM is output no matter what audio formats are
received.
• When set to “Bitstream”, HE-AAC audio formats can be output as Dolby Digital.
• When set to “Bitstream”, Dolby Digital Plus can be output as Dolby Digital.
Connecting external devices