Sharp LC-60UQ10KN - Manual (Page 42)

40
View settings
Go to “TV Menu” > “Setup” > “View setting”.
Setup
Network setup
Auto installation
View setting
Channel settings
CH list
:Back :Enter
Menu
Select recording device
View setting
Auto installation
The TV automatically detects and stores all available
services in your area. This function also allows you
to perform the channel setting for digital, satellite
and analogue individually and reconfigure the
settings after the initial auto installation has been
completed.
1 Go to “TV Menu” > “Setup” > “View setting” >
“Auto installation”.
2 Press c/d to select “Yes”, and then press ;.
3 Press a/b/c/d to select the desired
language, and then press ;.
NOTE
• PIN input is required when executing “Auto installation”.
The default PIN is “1234”. To change the PIN setting,
refer to Individual setting — PIN (Page 43). To reset the
PIN setting (PIN input will no longer be needed), refer to
Reset the PIN (Page 78).
• You cannot set the Home/Store setting and the country
setting in “Auto installation” in the “Setup” menu. If
you want to reconfigure those settings, automatically
execute initial auto installation after executing “Reset”
from the “Setup” menu.
• The current country setting is displayed on the screen.
4 Press a/b to select the broadcast standard
you want to search, and then press ;.
E Digital search
After selecting the service you want to search,
either “Terrestrial” or “Cable”, refer to Digital
broadcast setting on page 15.
E Analogue search
The TV searches for, sorts and stores all the
receivable TV stations. Refer to Analogue
broadcast setting on page 15.
E Satellite search
After selecting “Satellite search”, the current
DVB-S/S2 setting screen is displayed. Refer to
the “Satellite search” setting on page 16.
NOTE
• After selecting “Next” in the DVB-S/S2 setting screen,
you need to select your preferred satellite broadcast to
start searching.
View setting
Programme setup
You can reconfigure the DTV service settings
automatically or manually.
1 Go to “TV Menu” > “Setup” > “View setting” >
“Channel settings” > “Programme setup”.
2 Press a/b to select the broadcast standard
you want to reconfigure, and then press ;.
NOTE
• PIN input is required when executing “Programme
setup”. The default PIN is “1234”. To change the PIN
setting, refer to Individual setting — PIN (Page 43).
To reset the PIN setting (PIN input will no longer be
needed), refer to Reset the PIN (Page 78).
Digital setting
Terrestrial
You can reconfigure the following settings when you
select “Terrestrial” in the initial auto installation or
the “Auto installation” menu.
E Additional search
Use this menu to add new services automatically
after “Digital search” in the “Auto installation” menu
has been completed.
E Manual search
Add new services within a specified frequency band.
• Enter the frequency using 0 _9 numeric buttons.
• You can perform “Manual search” with a service number
only when the five Nordic countries have been selected
in the country setting.
E Manual adjust
Configure various settings for each service using the
colour (R/G/Y/B) buttons.
Service
no.
Lock
Service
name
Lock CH skip Old LCN
CH skip Sort Delete
1 Press a/b to select the desired service.
2 Press the colour button on the remote control
unit corresponding with the item you want to
reconfigure.
• The ✔ mark indicates the operation is set to on.
Each time the colour button is pressed, you can
switch the corresponding operation on/off.
NOTE
• Depending on the installation country and/or
broadcaster or operator profile may only R option is
available.
Basic adjustment