S@ a v – Sharp XE-A213 User Manual
Page 19
17
Part
1
QUICK START GUIDE
Part
2
Part
3
• The lowest taxable amount is valid only when you select add on tax system. If you select VAT
(Value added system), it is ignored.
• If you make an incorrect entry before pressing the third
@
key in programming a tax rate, cancel
it with the
l
key.
• You do not need to enter the trailing zeros of the tax rate (after the decimal point), but you do
need to enter the decimal for fractions.
• If you select VAT system, the sign which you program is ignored.
To delete a tax rate, use the following sequence:
Merchandise can be classified into a maximum of 99 departments. Items sold using the department keys can
later be printed on a report shown as the quantities sold and sales amounts classified by department. The data
is useful for making purchasing decisions and other store operations.
Default setting for the VAT/tax statuses and signs are listed below.
Dept. code:
VAT/tax status:
Sign:
Dept. 1-10
VAT 1
(+)
Dept. 11-20
VAT 2
(+)
Dept. 21
VAT 1
(-)
Dept. 22-99
VAT 1
(+)
• To keep current setting on each programming, press the
s
key when the corresponding
guidance message is firstly displayed.
• When pressing the
A
key in the middle of procedure, the programming will terminate and the
data you entered before the press of
A
is saved.
• When pressing the
l
key twice in the middle of procedure, the programming will terminate and
the data you entered before pressing the
l
key twice is NOT saved.
• When pressing the PLU,
-
,
%
,
V
,
r
,
o
,
X
,
Y
,
c
or
b
key in the middle of
procedure except while entering texts or prices, the programming will move to the pressed key
programming.
s
@
A
v
@
Tax number (1 to 4)
9
6
Department Programming
A213_1 Quick Start Guide 06.4.28 8:20 PM Page 17