Sharp XE-A213 - Manual (Page 26)

24
5. Function programming (Press s to skip . / Press A to terminate.)
To program for the incremented PLU code, return to the step 2.
When you want to program for other than incremented PLU code, return to the step 1.
6. Terminate programming
Please refer to "Guidance for text programming" on page 14 as for how to entering characters.
When you press an appropriate number key (job code number) and press the
P
key for text entry just after you
start programming with the
s
key, the cash register will automatically be ready for text entry.
Then a little after displaying guidance message indicating what programming you are in, the register may ask
you to enter the first parameter. Referring to the corresponding “Procedure”, enter a parameter and start
character entries.
Clerk names (12 digits)
s @
To program another clerk
Character keys
(max. 12 digits)
Clerk no.
(1-25)
A
To keep current setting
s P
5
Unit price
PLU/subdept. 1/0 PLU code
Item name
Associated dept.
Print
0.00 A
(1) Press the A key to terminate direct PLU key
programming.
PLU.0072 0072
ENTER[00]KEY
s
(2) Press the s key to register the setting.
Immediately after displaying current text setting and
the corresponding PLU code for the next PLU,
guidance message will be displayed.
The PLU code is automatically incremented for a
new direct PLU key programming, and ready for
text programming for the incremented PLU code.
(1) Go to (2) when the function does not need to be
changed from "PLU". Otherwise, press : key to
display "SUBDEPT".
Each time
: key is pressed, the display shows
"SUBDEPT" and "PLU" alternatively.
Choose "PLU" for using the PLU code as PLU and
"SUBDEPT" for using the PLU code as
subdepartment.
Default setting is "PLU".
8 Text Programming
A213_1 Quick Start Guide 06.4.28 8:20 PM Page 24