Programming for – Sharp XE-A213 User Manual
Page 58
56
6. Discount calculation (for the subtotals) programming (Press
s
to skip. / Press
A
to terminate.)
7. Percent rate limit programming (Press
s
to skip. / Press
A
to terminate.)
8. Terminate programming
Item:
Selection:
Print:
A
Discount calculation
Enable*
0
(for the items)
Disable
1
B
Discount calculation
Enable*
0
(for the subtotals)
Disable
1
C
Always 0 is printed.
0
Programming for
V
1. Specify the key to program.
EXCHANGE PROG.
ENTER[00]KEY
V
(1) Press the
V
key to enter
V
programming.
Immediately after displaying "EXCHANGE PROG.",
guidance message for the next step will be displayed.
Operator display
Key operation
From left, ABC
Text
Sign
Percent rate
Percentage rate limit
0.00
A
(1) Press the
A
key to terminate the
%
key
programming.
ENTER[TL/NS]KEY
s
(2) Press the
s
key to register the setting.
90.00
90.00
(1) Enter percent rate limit using numeric key.
The rate limit can be set from 0.00 to 100.00.
Default setting is 100.00.
% HALO PROG.
100.00
s
(2) Press the
s
key to register the setting.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
(1) Go to (2) when the discount calculation for the
subtotals does not need to be changed from "SBTL
ENABLE". Otherwise, press
:
key to display
"SBTL DISABLE".
Each time
:
key is pressed, the display shows
"SBTL DISABLE" and "SBTL ENABLE" alternatively.
Default setting is "ENABLE".
A213_3 FOR THE MANAGER(SEEG) 06.4.28 8:33 PM Page 56