Sharp XE-A213 User Manual
Page 75
73
Part
3
FOR THE MANAGER
Part
2
Part
1
Logo message print format
You can select the number of lines for your logo message, and the position to print it on receipt.
For details of the logo message type, please refer to “Logo messages” on page 25.
*A:
Logo message type
0: Header 3-line message without graphic logo
3: Header 6-line message
5: Header 3-line message and footer 3-line message (default)
Thermal printer density
* 50 (100%) is the default setting. To make the print darker, set a larger number, and to make the print lighter,
set a smaller number.
EJ memory type
When this procedure is executed, EJ data is cleared, and PLU data (programming data and sales
data) are reset to the default after all data is cleared even if the same memory type is selected.
*A: 0 for EJ 8000 lines and PLU 1200 codes
1 for EJ 9000 lines and PLU 210 codes (default)
s
90
@
0
A
Key operation example
A
*A
s
@
90
s
50
@
70
s A
Key operation example
*
Printer density
(00-99)
A
s
To set 0
s
@
50
s
11
@
3
s A
Key operation example
*A
s
To set 0
s
@
11
A
A213_3 FOR THE MANAGER(SEEG) 06.4.28 8:33 PM Page 73