Sharp XE-A213 - Manual (Page 25)

23
Part
1 QUICK START GUIDE
Part
2
Part
3
2. Text programming (Press s to skip . / Press A to terminate.)
3. Unit price programming (Press s to skip . / Press A to terminate.)
4. Associated dept. programming (Press s to skip . / Press A to terminate.)
ENTER PLU TYPE
PLU
s
(2) Press the s key to register the associated dept.
code.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
1 1
(1) Enter an associated dept. code using numeric key.
For dept. 1 through 6, you may press the
corresponding department key.
Default setting is dept. 1.
For deleting PLU, enter 0 instead of an associated
dept. code.
ENTER DEPT# s
(2) Press the s key to register the unit price.
Guidance message for the next step will be displayed.
500 500
(1) Enter a unit price using numeric keys.
A maximum of 6 digits can be set.
For a subdepartment, set the limit amount of unit
price entry.
Default setting is 0.
PRICE
0.00
s
(3) Press the s key to register the item name.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
MELON_ MELON
(2) Enter an item name.
A maximum of 16 characters can be entered.
Please refer to “Guidance for text programming” on
page 14 for entering the item name.
When you start entering a character, the current
text data will be overwritten by new data.
Pressing the
P and @ key moves the cursor to
the right and left respectively.
ENTER TEXT
PLU.0071
:
(1) Press : key to enter text programming.
Immediately after displaying guidance message, the
current text data will be displayed.
A213_1 Quick Start Guide 06.5.30 9:04 AM Page 23