Sharp XE-A213 - Manual (Page 83)

81
Part
3 FOR THE MANAGER
Part
2
Part
1
PLU report by designated range
• Sample report
*: When you take Z1 report, “Z1” is printed.
PLU code
Item label
Mode title*
Report title
Range
Range sum
Sales q'ty and total
Individual clerk report
• Sample report
Full clerk report
The printout occurs in the same format as in the
sample report of individual clerk, but all clerk’s sales
data and total of all clerks are printed in the order of
clerk number (from #1 to #25).
Mode title*
Report title
Clerk code
Clerk name
Customer counter
Average
Order total–Paid total
NBAL counter
PBAL counter
Paid total
Order total
• When both sales quantities and sales amounts are zero, printing is skipped. If you do not want to
skip, change the programming. (Refer to “Print format” of “Various Function Selection
Programming 1”.)
• “X” represents read symbol and “Z” represents reset symbol in the reports.
• To stop reading and resetting the PLU sales report, turn the mode switch to the MGR position.
The data will not be erased when you reset.
• The drawer does not open when you take X/Z reports.
The drawer can be opened by pressing the A key to remove the till after closing your business.
• When printing is performed continuously, the printing may be intermitted several seconds. After
the intermission, the printing will be restarted.
For the sample reports of the full sales and periodic consolidation report, refer to "FULL SALES REPORT (Z
REPORT)" on page 32.
Daily Sales Totals 2
A213_3 FOR THE MANAGER(SEEG) 06.4.28 8:33 PM Page 81