Neff C47C62N3GB - Manual (Page 14)

14
Automatic programmes
The automatic programmes enable you to prepare food very
easily. There are 16 programme groups containing a total of
70 programmes.
In this section, you will find out
■
how to set one of the automatic programmes
■
hints and tips on the programmes
■
Which programmes you can set (programme tables)
Setting a programme
Select the correct programme from the programme tables.
Follow the instructions for the programmes.
Example in the picture: You want to steam 500 g fresh chicken
breast.
■
"Poultry" programme group
■
Programme "Chicken breast, fresh, steamed"
Selecting a programme group
1. Press on the operating mode selector to turn on the
appliance.
2. Press the X button.
The first programme group is shown on the text display.
3. Turn the operating mode selector until the desired
programme group appears.
Selecting the programme
4. Press the ì button.
The first programme in the programme group is shown on
the text display.
5. Turn the operating mode selector until the desired
programme is displayed.
Adjusting the cooking result individually
6. Press the ì button.
Individual adjustment is highlighted “- ЩЩЩШЩЩЩ +”.
7. Turn the operating mode selector to adjust the cooking result:
■
anti-clockwise: cooking results are set less intensively
■
clockwise: cooking results are set more intensively
You can also modify the cooking result permanently for all
programmes at the same time (see Section: Basic settings).
Enter the weight
A default weight appears on the temperature display.
8. Turn the temperature selector to set the weight of the items to
be cooked.
Press the
± info button to request information on the
accessories. The information is displayed for a few seconds.
9. Press the Start button to start the programme.
No heating indicator appears.
Checking the cooking time
Press the KJ clock function button repeatedly until the KJ
and x symbols light up.
Programme with preselected mode
For some programmes, you can set a y Preselection mode.
The programme will be started later and finish at the desired
time (see Section: Electronic clock).
Cancelling the programme
Press and hold the Start button to cancel the programme.
End of the programme
A signal sounds. Cooking has finished. To turn off the
appliance, press in the operating mode selector so that it clicks
into place.
:
Risk of scalding!
Hot steam may escape when the appliance door is opened.
Open the appliance door carefully during or after cooking.
When opening the door, do not lean over it. Ensure that,
depending on the temperature, steam is not visible.
Notes about the programmes
All programmes are designed for cooking on one level.
The cooking result can vary according to the size and quality of
the food.
Ovenware
Use the suggested ovenware. All meals have been tested using
this ovenware. The cooking result may change if you use
different ovenware.
When cooking in the perforated cooking container, always
insert the baking tray at level 1. Dripping liquid is caught.
Amount/weight
Do not fill the food more than 4 cm deep in the accessories.
The automatic programmes require the weight of the food. With
individual pieces, always enter the weight of the largest. The
total weight must be within the specified weight range.
Cooking time
After the programme is started the cooking time is displayed. It
may change during the first 10 minutes, as the heating-up time
depends, among other things, on the temperature of the food
and the water.
3
9HJHWDEOHV
3
3RXOWU\
&KLFNHQEUHDVWIUHVKVWHDPHG
6WDUW 0 3 3RXOWU\
&KLFNHQEUHDVWIUHVKVWHDPHG