Neff C47C62N3GB - Manual (Page 9)

9
Before using the appliance for the first time
In this section you will find out which steps are required before
using the appliance for the first time:
■
Setting the clock and language
■
Setting the water hardness range
■
Starting the appliance for the first time
■
Cleaning the accessories before use
■
Fitting the grease filter
Setting the language
Once the appliance has been connected to the power supply,
you must set the language for the text display.
1. Turn the temperature selector until the language you require
appears on the text display.
2. Press and hold the ± info button for 3 seconds.
Your setting is saved.
Changing the language
Your appliance must be switched on.
1. If required, turn the operating mode selector to the Û position.
2. Press and hold the ± info button for 3 seconds.
This takes you directly to the language selection screen.
3. Turn the temperature selector until the language you require
appears on the text display.
4. Press and hold the ± info button for 3 seconds.
Your setting is saved.
Setting the clock
Note: When you press the KJ clock function button, you have
3 seconds to set the clock using the rotary selector. Should this
have been insufficient for you, you can amend the clock time
later.
‹ : ‹‹ flashes in the clock display.
1. Briefly press the KJ clock function button to go to the
setting mode.
The
KJ and 3 symbols light up. ‚ƒ : ‹‹ appears in the
clock display.
2. Set the current time using the rotary selector.
Your setting is accepted after 3 seconds.
Changing the clock
To subsequently change the time, press the KJ clock function
button repeatedly until the KJ and 3 symbols light up again.
Change the time with the rotary selector.
Setting the water hardness range
Caution!
The appliance may become damaged due to the use of
unsuitable liquids.
Do not use distilled water, highly chlorinated tap water
(> 40 mg/l) or other liquids.
Only use cold, fresh tap water, softened water or uncarbonated
mineral water.
The water hardness "medium" (
™‡ƒ ) is the default setting.
Change the value if your water is softer or harder.
You can check the water hardness with the test strips supplied
or ask your water supplier.
Notes
■
If your water is very hard, we recommend that you use
softened water.
■
If you use only softened water, you can set your appliance to
the "softened" water hardness range.
■
If you use mineral water, set the water hardness to hard.
■
If you use mineral water, you must only use non-carbonated
mineral water (see section "Filling and emptying the water
tank").
You can change the water hardness range in the basic settings
when the appliance is switched on.
1. If required, turn the operating mode selector to the Û position.
2. Press and hold the ± info button until "Select language"
appears in the text display.
3. Briefly press the ± information button repeatedly until ™‡ƒ
appears in the temperature display (water
hardness "medium").
4. Use the temperature selector to set the water hardness.
5. Press and hold the ± info button for 3 seconds.
Your setting is saved.
Descaler 311 138
Honeycomb microfibre cloth 460 770
Accessories Order no.
6SUDFKHZlKOHQ
'HXWVFK
Water hardness Setting symbol (temperature dis-
play)
softened ™‡‹
soft ™‡‚
medium ™‡ƒ
hard ™‡„
very hard ™‡…