BT 75 - Manual (Page 11)

BT Response 75 – Issue 2 – Edition 1 – 7/10/03
9
Using your BT Response 75
You can switch your answering
machine on and off or set it to
Answer Only mode so callers
are unable to leave messages.
Press buttons in the order shown
To switch the answering machine
on or off:
Press the Answer on/off
button. You will hear “Answer
on”
or “Answer off”.
When off, the display shows a
single dash.
When on, the display shows
the number of messages
received e.g 5.
Press the Answer on/off
button again to switch between
on and off.
To set the answering machine
to Answer Only mode:
Press the Ans. Mode button.
You will hear “Answer Only on”
and the display will show
.
Callers will not be able to leave
a message.
If you press the Ans. Mode
button again you will hear
“Answer only off ”
. Your BT
Response 75 will return to
Answer On mode and display
the number of messages
received.
Answering machine controls
The message playback volume
can be set to a level suitable
for you.
The original volume setting is
3 (mid-level).
To increase the volume.
To decrease the volume.
As you press, a beep sounds
at the level you are selecting.
When the volume is at its
highest or lowest level you will
hear 2 beeps.
To adjust the loudspeaker
volume
Answer
on/off
Answer
on/off
Volume +
– Volume
Ans. mode
Ans. mode
To set the answering machine
Mode-Answer on/off or
Answer Only