BT 75 - Manual (Page 16)

To record a memo
Play
memo
BT Response 75 – Issue 2 – Edition 1 – 7/10/03
14
You can use your BT Response
75 to record a memo which
can be played back by another
user.
A memo can be of any length,
up to the maximum recording
time available (36 minutes).
Press and hold the Play/memo
button.
Your BT Response 75 will beep
and the display flashes ‘r’.
Keep holding the Play/memo
button and record your memo
clearly, about 15-30 cms from
the microphone.
To end the recording release
the Play/memo button.
Your BT Response 75 stores
memos and treats them in the
same way as incoming messages.
Please note
To play back, delete or skip forward or
backward through memos, follow the
instructions for playing back messages
(see below).
Press the Play/memo button.
Your BT Response 75 will
announce “You have X
messages”.
Messages and memos are
announced and played back in
the order they were received.
During message playback the
message indicator shows the
number of the message being
played. 9 flashes if the
message is number 10 or more.
Press the Skip
ᮣ
button to
skip forward to the beginning
of the next message.
Press the
ᮤ
Skip button once
to return to the start of the
current message or twice to go
back to the previous message.
Press the Pause button to
pause playback. The display
will flash P. Press it again to
resume playback.
When all your messages have
been played, your BT Response
75 announces “End of messages”
and the message indicator
counts down from 8 to 0.
Play
memo
Skip ᮣ
Skip ᮣ
Pause
To playback messages and
memos
Audible message alert
Press and hold ᮤ
Skip to toggle
between on and off.
You can stop your BT Response 75
from beeping to indicate new memos
and messages have been left.
Press and hold
ᮤ
Skip button.
Your BT Response 75 announces
“Message Alert off”.
To switch message alert on press and
hold the
ᮤ
Skip button again.
Your BT Response 75 announces
“Message Alert On”.