BT 75 - Manual (Page 20)

18
Remote access
You can switch on and operate your answering machine from
another TouchTone phone to play back your messages and memos
BT Response 75 – Issue 2 – Edition 1 – 7/10/03
To keep your messages private, your
BT Response 75 requires you to enter a
2-digit security code before you can
play back your messages.
For your security code, look at the swing
out label on the underside of the machine.
(You cannot change the security code).
Your security code
To operate your BT Response
75 remotely
Dial your BT Response 75
phone number.
When you hear your outgoing
KEYPAD message, press the
✱
button.
You will hear 2 beeps.
The message counter on your
BT Response 75 will flash ‘A’.
KEYPAD
Key in the first digit of your
security code (within 8 seconds).
You will hear a beep.
KEYPAD Key in the second digit of
your security code. You will hear
a beep.
If you enter the incorrect code,
your BT Response 75 will
announce “Security code error.
Please enter again” . If you
enter the wrong code again,
your BT Response 75 will
announce “Security code error.
Thank you for calling”
and then
end the call.
Once you have entered the
correct security code, you can
operate your BT Response 75
remotely.
If you have no messages, your
BT Response 75 will announce
“You have no messages”
and wait
for 8 seconds for you to enter
another remote instruction.
If you have new messages,
your BT Response 75 will
announce “You have ‘x’
message(s)”,
and then play
them back to you. See ‘Menu
for remote access’
, page 19 for
more remote functions.
To turn your BT Response 75 on
This is useful if you forgot to
turn on your answering machine
before going out.
Ring your BT Response 75. It
will answer the call after 20
rings. When you hang-up, the
answering machine will be
switched on and will answer calls.