BT 75 - Manual (Page 12)

BT Response 75 – Issue 2 – Edition 1 – 7/10/03
10
Press and hold down the
Time button, your BT
Response 75 announces the
current hour setting.
Whilst holding down the
Time button, press the Skip
ᮣ
or
ᮤ
Skip buttons to select the
correct hour.
Press and hold the Skip
ᮣ
or
ᮤ
Skip buttons to move rapidly
through the hour settings.
When the hour setting you
require is announced, release
the Time button.
Press and hold down the
Time button, your BT
Response 75 announces the
current minute setting.
Whilst holding down the
Time button, press the Skip
ᮣ
or
ᮤ
Skip buttons to select the
correct minutes.
Press and hold the Skip
ᮣ
or
ᮤ
Skip buttons to move rapidly
through the minute settings.
When the minute setting you
require is announced, release
the Time button.
Your BT Response 75 will
announce the full day and time.
Time
Skip ᮣ
ᮤ Skip
Time
Time
Skip ᮣ
ᮤ Skip
Skip ᮣ
ᮤ Skip
Skip
ᮣ
ᮤ
Skip
Please note
The time on your BT Response 75 is
announced using the 12-hour clock.
Be sure to hold down the
ᮤ or ᮣ buttons
long enough for your machine to say
whether it is am or pm.
Skip ᮣ
ᮤ Skip
Your BT Response 75 will
store the day and time an
incoming message or memo
was recorded. The BT
Response 75 uses the 12 hour
clock.
To check the time:
Press and release the Time
button, your BT Response 75
will announce the day and time
in hours and minutes.
To set the time:
Press and hold down the
Time button, your BT
Response 75 announces the
current day setting.
Whilst holding down the
TIME button, press the Skip
ᮣ
or
ᮤ
Skip buttons to select the
correct day.
When the day setting you
require is announced, release
the Time button.
To set the time and day
Please note
If you alter the volume during playback
of a message, the beep does not sound
but the volume will change accordingly.
If the volume is below mid-volume,
it will automatically return to the
mid-volume setting when any buttons
are pressed (for example, if a message is
played back). The volume is unaffected
during remote access or call screening.
Time