BT 75 - Manual (Page 22)

BT Response 75 – Issue 2 – Edition 1 – 7/10/03
20
To switch your answering
machine on/off
When you hear “End of
messages”
or “You have no
messages” , within 8 seconds,
KEYPAD press 8 on your keypad.
Your BT Response 75
answering machine will switch
off and announce “Answer off”.
KEYPAD
Press the 8 button again within
8 seconds, to switch back on
again. Your BT Response 75
will announce “Answer On”.
To switch between Answer
Record and Answer Only mode
When you hear “End of
messages”
. Within 8 seconds,
KEYPAD
press 3 your BT Response 75
will announce “Answer Only
on”
or “Answer Only off”.
KEYPAD
Press 3 again to change the
setting.
To check your outgoing
message
When you hear “End of
messages”
or “You have no
messages” , within 8 seconds,
KEYPAD
press 9 on the keypad.
Your BT Response 75 will play
back your message.
To change your outgoing
message
When you hear “End of
messages”
or “You have no
messages” , within 8 seconds,
KEYPAD
press 7 twice.
Your BT Response 75 will beep
to let you know it is starting
to record.
When you have finished
recording your new outgoing
message, press and hold the
KEYPAD 0 button for 1 second.
Your BT Response 75 will beep
and play back your message.
To retrieve the default
KEYPAD
announcement, press 5 during
playback of your message.
To pause a message
During message playback:
KEYPAD
Press the 2 button. You will
hear a beep every 10 seconds.
KEYPAD Press 2 again to resume
playback.
If you pause for longer than
60 seconds, the line will be
disconnected.