BT 75 - Manual (Page 14)

12
BT Response 75 – Issue 2 – Edition 1 – 7/10/03
Call counter
The counter will display the
number of messages that have
been recorded in the memory.
If you have received 10 or
more messages the display
will flash 9 to indicate this.
Please see page 23 for a guide
to the display.
To set the answer delay
Please note
The Time Saver setting can avoid
you the cost of a call when accessing
your machine remotely from an
external telephone.
Your BT Response 75 is set to
answer calls after 4 rings
You can change the number of
rings before your BT Response
75 will answer a call. You have
a choice of between 2-9 rings
and Time Saver.
When set to Time Saver your
BT Response 75 will answer
after 6 rings if no new
messages have been recorded,
or 2 rings if new messages
have been recorded (for more
information on remote access,
see page 18).
Press and hold the Skip
ᮣ
button.
To delete your outgoing
message
You can delete either of your
outgoing messages and return
to one of the pre-recorded
outgoing messages.
Ensure that you select the
correct outgoing message that
you want to delete. For example,
if you want to delete the
Answer Only outgoing message
make sure your BT Response
75 is set to Answer Only first.
Press the OGM button.
During playback of your
outgoing message press the
Delete button.
Your OGM will stop playing,
you will hear a short beep and
your BT Response 75 will
return back to the pre-
recorded outgoing message
OGM
Delete
Select the Answer mode in which
you want to check your OGM:
Answer on/off
or
Answer Only.
Press the OGM button.
Your outgoing message will be
played back to you.
To check your outgoing
message
OGM
Answer
on/off
Ans. mode
Skip
ᮣ