Connecting the 100base-fx port, Connecting to the console port, Connecting the 100base-fx port -11 – Bay Technical Associates BayStack 304 User Manual
Page 45: Connecting to the console port -12, Figure 2-5, Sc connection for the 100base-fx mda port -11, Installing the baystack switches
Installing the BayStack Switches
893-01010-A
2-11
Connecting the 100BASE-FX Port
The 100BASE-FX fiber media adapter uses a multimode fiber connector to
provide direct connection to other compatible Fast Ethernet devices over
62.5/125
µ
m multimode fiber optic cabling. Connection to the 100BASE-FX port
is through a standard SC connector, shown in
. The 100BASE-FX
media adapter can be used as a direct attachment to end stations, servers, switches,
or repeaters where multimode fiber optic cabling is already installed.
Figure 2-5.
SC connection for the 100BASE-FX MDA port
Connecting to the Console Port
The serial console interface is an RS-232 port that enables a connection to a PC or
terminal for monitoring and configuring the switch. You can also connect this port
to an external modem to enable remote dial-in management of the switch. The
port is implemented as a data communication equipment (DCE) connection, using
a male DB-9 connector.
100BASE-TX
MDA
1
3
5
7
9
11
2
4
6
8
10
12
7467EA
MFX-1
100BASE-FX
TX
RX
Link
F Dx
89301010.BK Page 11 Tuesday, June 10, 1997 8:00 PM