Figure 2-10. system configuration menu -18 – Bay Technical Associates BayStack 304 User Manual
Page 52
Using the BayStack 303 and 304 Ethernet Switches
2-18
893-01010-A
To set the IP address, subnet mask, and gateway address for the switch, follow
these steps:
1.
Type 2 to select 2---System Configuration from the Main Menu.
This selection displays the System Configuration menu (see
).
Figure 2-10.
System Configuration menu
*****************************************************************************
Bay Networks BayStack 303 Ethernet Switch
IP Address:
[0.0.0.0]
Mac Address:
[00:00:81:12:12:12]
Software Version:
[1.0]
System Up Time:
[0d:00h:00m:00s]
Switch Status:
[Switching]
*****************************************************************************
System Configuration
1 -- Switch Network Configuration
2 -- Port Configuration
3 -- Spanning Tree Configuration
4 ---SNMP Configuration
5 -- Reset to Default
Enter Command ([ESC]---Previous Screen [Space]---Refresh Screen)
89301010.BK Page 18 Tuesday, June 10, 1997 8:00 PM